SaniTite HP Sanitary pipe is the most recent addition to the already proven N-12 product line and has been specifically/engineered for the gravity flow sanitary sewer market. The bell and spigot joining system provides an added factor of safety for design/engineers by including polymer reinforced bells and double gasket spigots on every stick of pipe.

Advanced polypropylene resin technology and an exclusive triple wall design (30"–60") provides/enhanced pipe stiffness, beam strength and joint integrity making HP sanitary the logical choice for your gravity flow sanitary sewer project.

You'll recognize SaniTite HP pipe by its distinctive gray color. But more importantly than its color, is what it will do for you. If you are being asked to do more with less, then HP sanitary is your answer!

Please contact us to extend your large diameter sanitary sewer dollars.
SaniTite HP Pipe
Meets ASTM F2736 and F2764  
SaniTite HP (High Performance) couples advanced polypropylene resin technology with a proven dual wall (12”-30”) and exclusive triple wall (30”-60”) profile design for superior performance and durability. 

SaniTite HP meets and exceeds typical standards for pipe stiffness and joint integrity. When specifying pipe per ASTM F2736 and/or ASTM F2764 on a gravity flow sanitary sewer project, you are specifying the most stringent performance requirements in the industry.


Advanced Construction 
  • Standard 12”-60” (300 mm-1500mm) diameters

  • Varied lengths available 13’ (4.0 m), 16.3’ (4.9m) 
        and 20’ (6.1m)

  • Redundant double gasketed joints

  • Inert material 

  • 1,000 hour 10.8 psi (74.5 kPa) joint test for 30”-60” (750 mm - 1500 mm) pipe per ASTM F2736

  • Industry standards for manhole connections, testing and installation
Add this page to your favorites.
Call: 306 782 4055
Specification Sheets